|
Product |
Pricing |
|
1-Part Water Based Metal Primer Gallon |
$70.50 |
|
1-Part Water Based Metal Primer 5 Gallon |
$354.95 |
Eco-Tuff 1-Part Water Based Metal Primer:
Approximate Spread Rate:
250-300 sq.ft./gal. A one coat application product.
Features:
-
Green Building Compliant
-
Excellent Durability
-
Excellent Bonding
-
No HAP's or TAP's
-
Low VOC
-
Very Low Odor
-
Non-Flammable
-
Corrosion Inhibiting
-
Abrasion Resistant
-
Chemical Resistant
-
Fast Drying
TECHNICAL DATA
:
Installation Temperature
: Above 40º F (4º C) to 120º F (49º C)
Relative Humidity
: 85% maximum, below 80% for best results
Approx. Coverage
: 250 - 300 sq.ft/gal (60.96-76.20 sq. meter)
Dry to Touch
: 1 Hour Volume
Serviceability to Topcoat
: Minimum1 hours @ 72º F (22º C) Maximum 48 hours @ 72º F (22º C)
Finish:
Matte - Color: Clear
VOC Content
: <14 g/l, 1.0 lb/gal
Odor
: Low
Wet mils
: 4.0 and dry mils: 3.0
Net Weight
: 9 lbs/gal (4.1 kg)
APPLICATION:
All metal surfaces must be clean and dry prior to application. Remove all loose particles, grease, wax, or oily residues. Remove rust or paint by sandblasting, power brushing or hand wire brushing before primer is applied. Sanding metal surfaces will help increase bond strength of the primer and topcoats. Spray application is recommended. Changes in pressures and tip sizes may be necessary for proper spray characteristics. Always purge spray equipment before use. Manual application may be applied by brush or 3/8” nap roller. Apply material at approximately 4.0 wet mils. Allow a minimum of 1 hour dry time and not to exceed 48 hours prior to application of your topcoat material. If maximum recoat time is exceeded, sand the surface before recoating. Clean up with soap and water.
